Banana Pi BPI-F3 is a industrial grade RISC-V development board, it design with SpacemiT K1 8 core RISC-V chip, CPU integrates 2.0 TOPs AI computing power. 2/4/8/16G DDR and 8/16/32/128G eMMC onboard.2x GbE Ethernet prot, 4x USB 3.0 and PCIe for M.2 interface, supprt HDMI and Dual MIPI-CSI Camera.



Key Features：

* 8 core RISC-V chip, CPU integrates 2.0 TOPs AI computing power
* Single-core general computing power equivalent to 1.3 times Cortex-A55
* Supports 32-bit LPDDR4/4X, with a maximum of 16GB of memory
* 4K decoding and encoding
* 5-lane PCIE2.1 expansion capability
* 1x USB 3.0 + 2x USB 2.0 interfaces
* 12x UART serial ports
* Operating temperature range: -40°C to 85°C

Hardware interface:


Hardware spec:

HardWare Specification of Banana Pi BPI-F3 RISC-V SBC
CPU	SpacemiT K1 8 core RISC-V chip
AI	2.0Tops from RlSC-V Core
Memory	4 GB LPDDR4 (Supports up to 8G LPDDR4)
Storage	16G eMMC flash,4M SPI NOR,32M SPI NAD
SD card	MicroSD card slot (Greater than 256MB)
Wireless	2.4G/5G WiFi and Bluetooth 4.2
Ethernet	2x GbE Ethernet port(supports PoE with add-on PoE HAT)
HDMI	1x full-size HDMI digital Audio output(HDMI1.4,up to 1080p@60fps )
Audio	Speaker，Mic， Earphone
Camera	MIPI-CSI, Dual-shot support
USB	4x USB 3.0 Type-A HOST, 1x USB 2.0 Type-C OTG
PCIe	PCIE2.1 2lane * 2. PCIEB 2lane connect M.2 KEY M( Support JMB582 expansion card to SATA ) PCIEC 1lane connect MINI PCIE
GPIO	26-pin header
Buttons	Reset, Power and Burn
IR	IR-Rx
LED	Power Status
Power	DC in and TYPE-C in
Size	148x100 mm
Weight	200g

Online wiki development documents: https://docs.banana-pi.org/en/BPI-F3/BananaPi_BPI-F3