Banana Pi open source hardware community


Contact US

You are here:Home >> products >> SBC


Banana Pi BPI-M64 with Allwinner A64 chip design,2 GB DDR3 RAM and 8G eMMC

  • Allwinner A64 1.2 Ghz Quad-Core ARM Cortex A53 64-Bit Processor
  • 8G EMMC
  • 10/100/1000Mbps Ethernet
  • WiFi  & BT onboard
  • MIPI LCD interface
  • Camera interface

    Banana Pi BPI-M64 is a 64-bit quad-core mini single board computer. It features 2GB of RAM and 8GB eMMC. It also has onboard WiFi and BT. On the ports side, the BPI-M64 has 2 USB A 2.0 ports, 1 USB OTG port, 1 HDMI port, 1 audio jack, and lastly a DC power port. The processor is pin-to-pin comptialbe with R18, so it comes with two versions:M64 and M64-R18.

    Also being a member of the Banana Pi family, the M64 is a big jump from the octa-core BPI-M3. This is because this Banana Pi BPI is named after its 64-bit SoC. BPI-M64 will be reserved for an upcoming board

    BPI-M64 is an open platform device, it is for anyone who wants to play and build with developer technology instead of simply using consumer technology. Backed by our community, starting a project and building servers is fun and rewarding. We welcome all companies, DIYers, and tech loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project.

    Hardware inerface:

    Hardware spec:

    HardWare Specification of Banana pi BPI-M64
    CPU Allwinner 64 Bit Quad Core ARM Cortex A53 1.2 GHz CPU
    GPU Dual core Mali 400 MP2 GPU
    Memory 2GB LPDDR3 (shared with GPU)
    Storage MicroSD slot with support for up to 256GB expansion and 8G eMMC flash with support for up to 64GB
    Network 10/100/1000 Mbit/s Ethernet + Wi-Fi 802.11 b/g/n + BT4.0
    Video Input(s) A CSI input connector allows for the connection of a designed camera module
    Video Output(s) 1080p capable HDMI port and multi-channel audio output (NO H./X.265 capabilities)
    Audio Input(s) On board microphone
    Audio Output(s) 3.5mm jack and HDMI
    USB ports USB 2.0 PORT (x2), USB OTG (x1)
    Remote IR Receiver
    GPIO 40 Pin Header : GPIO (x28) and Power (+5V, +3.3V and GND). GPIO pins can be used for UART, I2C, SPI or PWM
    Switches Reset, Power and U-boot
    LED Power Status and 8P8C
    Power Source 5 volt @2A via DC Power and/or Micro USB (OTG)
    Size & Weight 92x60mm, 48g
    OS Android and Linux

    Online wiki development documents:

    Please submit your basic information, we will contact you as soon as possible!





Related products